Welcome to Journal of Automotive Safety and Energy,

Journal of Automotive Safety and Energy ›› 2022, Vol. 13 ›› Issue (4): 738-749.DOI: 10.3969/j.issn.1674-8484.2022.04.015

• Intelligent Driving and Intelligent Transportation • Previous Articles     Next Articles

End-to-end autonomous driving method based on multi-source sensor and navigation map

ZHU Bo1,2(), ZHANG Jiwei1(), TAN Dongkui1,2,*(), HU Xudong1   

  1. 1. Automotive Research Institute, Hefei University of Technology, Hefei 230009, China
    2. Intelligent Manufacturing Institute, Hefei University of Technology, Hefei 230009, China
  • Received:2022-05-21 Revised:2022-07-25 Online:2022-12-31 Published:2023-01-01
  • Contact: TAN Dongkui E-mail:zhubo@hfut.edu.cn;z18336345753@163.com;tandongkui@126.com

Abstract:

This paper proposed a multiple-input single-output (end-to-end) autonomous driving decision control model based on multi-source sensors and navigation map to make up for the shortcomings of existing end-to-end autonomous driving methods in active obstacle avoidance and passing through intersection by using the PilotNet model based on Deep Neural Network (DNN). The sensor data in model’s input end consisted of three parts: a monocular front view camera, a 2-D top view obtained by 360° multi-layer Light-Laser Detection and Ranging (LiDAR), and a local navigation map based on accurate positioning. The model’s output end generated the steering wheel angle, which was a vehicle control command. Some multi-condition simulations and real vehicle tests were conducted. The results show that the root mean square error (RMSE) of steering wheel angle decreases by 37% compared with that by using the PilotNet model. Therefore, the model has the ability of active obstacle avoidance and intersection passing.

Key words: autonomous vehicles, end-to-end autonomous driving, neural networks, camera, navigation maps, light-laser detection and ranging (LiDAR)

CLC Number: