Key technologies of the powertrain of a typical fuel cell sedan

doi:10.3969/j.issn.1674-8484.2016.02.011

Journal of Automotive Safety and Energy ›› 2016, Vol. 07 ›› Issue (02): 210-217.DOI: 10.3969/j.issn.1674-8484.2016.02.011

Previous Articles Next Articles

Key technologies of the powertrain of a typical fuel cell sedan

FANG Chuan^1,2, XU Liangfei ^1,2,3, LI Jianqiu^1,2, OUYANG Minggao¹

1. State Key Lab of Automotive Safety and Energy, Tsinghua University, Beijing 100084, China ；
2. Collaborative Innovation Center of Electric Vehicles in Beijing, Beijing 100081, China ；
3. Institute of Energy and Climate Research, IEK-3: Electrochemical Process Engineering, 52425 Jülich, Germany

Received:2016-04-03 Online:2016-06-25 Published:2016-07-06

Abstract

Abstract:

The innovative technologies on the powertrain of a kind of foreign-country mass-produced fuelcell sedan were analyzed to further promote research and development of China’s fuel cell vehicles. These technologies promoted the maximum power, environmental adaptability, reliability, durability, hydrogentank
mass effectiveness, as well as reduced cost, so that popularized fuel cell application onto vehicles. The powertrain topology, the fuel cell stack assembly, high pressure hydrogen storage system on this kind of sedan are of significance to global fuel cell researchers, so do the internal self-humidification of the fuel cell system and bipolar plate design.

Key words: fuel cell sedan, powertrain, stack assembly, high pressure hydrogen storage system, internal selfhumidification, bipolar plate

FANG Chuan, XU Liangfei, LI Jianqiu, OUYANG Minggao. Key technologies of the powertrain of a typical fuel cell sedan[J]. Journal of Automotive Safety and Energy, 2016, 07(02): 210-217.

[1]	ZHONG Hao, WANG Weida, YANG Chao, YANG Liuquan, ZENG Gen, LI Tonghui. Electromechanical state stability evaluation method of series hybrid electric powertrain for heavy vehicle [J]. Journal of Automotive Safety and Energy, 2025, 16(5): 725-735.
[2]	DING Yujie, GAN Quanquan, SHAO Yangbin, XU Liangfei, LI Jianqiu, OUYANG Minggao. Influence of anisotropic conductive expanded graphite bipolar plates on performance of proton exchange membrane fuel cell [J]. Journal of Automotive Safety and Energy, 2024, 15(4): 526-535.
[3]	XU Min, ZHANG Yijia. Advancements in the powertrain technology of hybrid electric vehicles in China [J]. Journal of Automotive Safety and Energy, 2024, 15(3): 269-294.
[4]	ZHANG Junliang, CHENG Ming, LUO Xiashuang, LI Huiyuan, LUO Liuxuan, CHENG Xiaojing, YAN Xiaohui, SHEN Shuiyun. Current status of the research on key technologies of vehicle fuel cell stack [J]. Journal of Automotive Safety and Energy, 2022, 13(1): 1-28.
[5]	SI Dechun, JIAN Jiting, XU Haosen, WANG Shangshang, WANG Cheng, ZHANG Jianbo. -30 °C start-up of a PEFC stack based on alternate hydrogen pump method [J]. Journal of Automotive Safety and Energy, 2021, 12(4): 604-612.
[6]	ZHANG Xuefeng, LIU Zhiwen, CHEN Guodong, YANG Yunbo, LI Shoukui. Optimal strategy of passenger car powertrain control for improving vibration at low engine speed [J]. Journal of Automotive Safety and Energy, 2021, 12(2): 193-200.
[7]	HU Haoran, YUAN Yuebo, AN Lisha, WANG Hewu. In-searching for highest system efficiency of commercial vehicle powertrains [J]. Journal of Automotive Safety and Energy, 2020, 11(4): 428-443.
[8]	JIA Tian, ZHENG Bin, Warnecke W, Kolbeck A, Aradi A, Kofod M, Clark R, Wilbrand K . Shell’s view on future mobility fuels: A patchwork, or “mosaic” approach will be needed to address societies energy needs [J]. Journal of Automotive Safety and Energy, 2020, 11(1): 17-35.
[9]	HAN Zhiyu, WU Zhenkuo, GAO Xiaojie . Development trend of internal combustion engines in the revolution of automotive powertrain [J]. Journal Of Automotive Safety And Energy, 2019, 10(2): 146-160.
[10]	DU Zhiliang, ZHANG Ke, LI Cheng, et al. Developing of hybrid bus by optimizing drivability and fuel economy [J]. Journal Of Automotive Safety And Energy, 2017, 08(04): 425-431.
[11]	Emrah T. YILDIZ , Quazi FAROOQI , Sohel ANWAR*, Yaobin CHEN , Afshin IZADIAN . Nonlinear Constrained Component Optimization for the Powertrain Configuration of a Plug-in Hybrid Electric Vehicle Powertrain [J]. Journal Of Automotive Safety And Energy, 2012, 3(1): 64-70.

Key technologies of the powertrain of a typical fuel cell sedan

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 11

Recommended Articles

Metrics

Comments

Journal information

Online journal

Author center

Review center

Contact us