| 1] Pesaran A A. Battery thermal models for hybrid vehicle simulations [J]. J Power Sources, 2002, 109 : 377-382.[2] WU Maosung, WANG Yungyun ,WAN Chichao, et al. Heat dissipation design for lithium-ion batteries [J]. J Power Sources, 2002, 109: 160-166. [3] Kim G H, Pesaran A. Battery thermal management system design modeling [C]// The 22nd Int Battery, Hybrid and Fuel Cell Electric Vehicle Conf and Exh, October 2006-10-23-28, Yokohama, Japan.[4] Ramadass P, Haran B, White R, et al. Capacity fade of Sony 18650 cells cycled at elevated temperatures: Part II , capacity fade analysis [J]. J of Power Sources, 2002, 112: 614-620.[5] Khateeb S A, Amiruddin S, Farid M,et al. Thermal management of Li-ion battery with phase change material for electric scooters: experimental validation [J]. J of Power Sources, 2005, 142: 345-353.[6] Pesaran A A. Battery thermal management in EVs and HEVs: Issues and solutions [C]// Adv Automotive Battery Conf, 2001-02-06-08, Las Vegas, Nevada.[7] Khateeb S A, Farid M M, Selman J R, et a1. Design and simulation of a lithium-ion battery with a phase change material thermal management system for an electric scooter [J]. J of Power Sources, 2004, 128: 292-307.[8] Pesaran A, Vlahinos A, Stuart T. Cooling and preheating of batteries in hybrid electric vehicles [C]// The 6th ASME-JSME Thermal Engineering Joint Conf, 2003-03-16-20.[9] Sabbah R, Kizilel R, Selman J R, et al. Active (air-cooled) vs. passive (phase change material) thermal management of high power lithium-ion packs: Limitation of temperature rise and uniformity of temperature distribution [J]. J of Power Sources，2008, 182: 630-638.[10] Bharathan D, Pesaran A, Kim G, et a1. Electro-thermal modeling to improve battery design [C]// IEEE Vehicle Power and Propulsion Conf, Chicago, Illinois, 2005-09-07-09. |
